Skip to main content
Speak to a consultant: 0161 926 8519Mon–Fri, 9–5
Contact
Call us — Mon–Fri 9–50161 926 8519Book a Free Compliance Review
Hero + ToolEmbed
ISO 45001 GAP ANALYSIS · 15 QUESTIONS · ~5 MINUTES

See how close you are to ISO 45001 in 15 questions.

ISO 45001 is the international standard for managing occupational health and safety, and the gap between "we run a tight ship" and "we'd pass the audit" is usually wider than people expect. Fifteen questions here, mapped to the standard's own clauses, and you'll see exactly where that gap sits.

Start the gap analysis Book a Free Readiness Review
ISO 45001 gap analysis

How close is your safety management system?

Tick what you already have — we'll estimate how far you are from a certifiable ISO 45001 system.

FeatureGrid
WHAT THE GAP ANALYSIS LOOKS AT

Fifteen questions, mapped to the clauses a certification body uses.

Each answer maps to a clause of ISO 45001, so the report speaks the same language as the auditor. Answer what you know. A "no" is just a gap to close, not a failure.

Leadership and worker consultation

How top management owns health and safety, and how workers are consulted and involved. Clauses 5 and 5.4.

Hazard identification and risk

How you spot hazards, assess risk and decide what controls are needed across the business. Clause 6.

Legal and other requirements

Whether you track the legislation that applies to you and can show you meet it.

Operational planning and control

How safe working is planned, run and controlled day to day, including contractors and procurement. Clause 8.

Incident, audit and review

How you investigate incidents, audit the system and run management review to keep improving. Clauses 9 and 10.

StepProcess
HOW IT WORKS

Five minutes now. A clause-by-clause report in your inbox.

— STEP 01
Answer fifteen yes-or-no questions
Around five minutes. Answer what you know. A "no" is simply a gap to close.
— STEP 02
We score you against the standard
Each answer maps to an ISO 45001 clause, so the report reads the way a certification body does.
— STEP 03
Get your gap report by email
See which parts of your system are ready, which need work and which are missing. It arrives within minutes. No cold call.
— STEP 04
Get a route to certification
The report lays out what to build first and what the journey looks like from here. If the gaps look daunting, book a free readiness review.
FaqAccordion
QUESTIONS

Common questions

What is an ISO 45001 gap analysis?
It's an assessment of your current health and safety management against the requirements of ISO 45001, the international standard. It shows which clauses you already meet and where the gaps are, so you know what to build before you go for certification. This tool gives you that in fifteen questions.
How accurate is a 15-question gap analysis?
It gives you a reliable high-level read on where you stand against each major clause. A full pre-certification gap analysis goes deeper and is something your consultant would run on site, but this tool tells you quickly whether you're close, halfway, or near the start.
We already hold ISO 9001. Does that help with 45001?
It helps a lot. ISO 9001, 14001 and 45001 share the same high-level structure, so much of your management system framework carries across. The report flags what transfers and what is specific to occupational health and safety.
What happens after the gap report?
You'll see the route to certification laid out. If you want help walking it, we run the full journey from gap analysis through implementation to certification and surveillance prep, with a named consultant throughout.
Why trust the analysis?
The questions are built on the standard itself and the route our ISO consultants take clients through. Gary Allen (Grad IOSH), who leads our ISO work, runs the full seven-phase journey, gap analysis to certification to surveillance prep. We're Qualitas IMS accredited across ISO 9001, 14001 and 45001.
Are my details safe?
Your email is used to send the report and occasional ISO updates you can opt out of any time. We never sell your data. See the privacy policy for the detail.
CtaBand

A gap analysis points you in the right direction. A consultant gets you there.

The gap analysis shows you how far off certification you are. Gary, who leads our ISO work, does the rest: the full seven-phase journey from gap analysis through implementation to certification, surveillance prep, and standing with you when the certification body audits. We're Qualitas IMS accredited across ISO 9001, 14001 and 45001. Book a free readiness review and we'll take you to certified.

Book a Free Readiness Review Call 0161 926 8519
Book a Free Compliance Review